4.4 Start-Up Flowcharts
These flowcharts summarize steps required to start the drive. Use the flowcharts to determine the most appropriate start-up
method for a given application. The charts are quick references to help familiarize the user with start-up procedures.
Flowchart Subchart Objective Page
A – Basic start-up procedure and motor tuning 147
–
A-1 Simple motor setup using V/f mode 148
A-2 High-performance operation using Open Loop Vector or Closed Loop Vector motor control 149
A-3 Setting up the drive to run a permanent magnet (PM) motor 151
4.4 Start-Up Flowcharts
146
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
To Next Page
Loading...
