YASKAWA U1000 - Terminal Cover; Models 2 O0028 to 2 O0130 and 4 O0011 to 4 O0124

3.5 Terminal Cover
Follow the procedure below to remove the terminal cover for wiring and to reattach the terminal cover after wiring is complete.
u
Models 2o0028 to 2o0130 and 4o0011 to 4o0124
n
Removing the Terminal Cover
1.
Loosen the terminal cover screw.
Figure 3.14 Removing the Terminal Cover
2.
Push in on the tab located on the bottom of the terminal cover and gently pull forward to remove the terminal cover.
Figure 3.15 Removing the Terminal Cover
3.5 Terminal Cover
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
89
3
Electrical Installation