YASKAWA U1000 - U8: Driveworksez Monitors; U9: Power Monitors

• The offset value added to the frequency reference by the frequency offset function. Refer to Setting 44, 45, 46: Offset
Frequency 1, 2, 3 on page 285.
• The bias value added to the frequency reference by the Up/Down 2 function (see Setting 75, 76: Up 2/Down 2 Function)
Refer to U6: Operation Status Monitors on page 579 for a complete list of U6-oo monitors and descriptions.
u
U8: DriveWorksEZ Monitors
These monitors are reserved for use with DriveWorksEZ.
A complete description of the U8-oo monitors can be found in the DriveWorksEZ instruction manual.
u
U9: Power Monitors
The total consumed power and regenerated power are displayed for these parameters. Refer to U9: Power Monitors on page
581 for a complete list of U9-oo monitors and descriptions.
5.11 U: Monitor Parameters
352
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual