u
Quick Reference
Easily Set Parameters for Specific Applications
Preset parameter defaults are available for setting up applications. Refer to Application Selection on
page 154.
Run a Motor One Frame Larger
This drive can operate a motor one frame size larger when running variable torque loads such as fans and pumps. Refer to C6-01: Drive Duty Mode
Selection on page 233.
Drive a Synchronous PM Motor
The drive can operate synchronous PM motors. Refer to Subchart A-3: Operation with Permanent
Magnet Motors on page 151.
Perform Auto-Tuning
Automatic tuning sets motor parameters. Refer to Auto-Tuning on page 157.
Maintenance Check Using Drive Monitors
Use drive monitors to check if fans, capacitors, or other components require maintenance. Refer to Performance Life Monitors Maintenance
Monitors on page 421.
Fault Display and Troubleshooting
Refer to Drive Alarms, Faults, and Errors on page 362 and Refer to Troubleshooting without Fault Display on page 406.
Standards Compliance
Refer to European Standards on page 650 and Refer to UL and CSA Standards on page 656.
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
3
To Next Page
Loading...
