YASKAWA U1000 - D: Reference Settings; D1: Frequency Reference

B.6 d: Reference Settings
Reference parameters set the various frequency reference values during operation.
u
d1: Frequency Reference
No.
(Addr.
Hex)
Name LCD Display Description Values Page
d1-01
(0280)
Frequency Reference 1 Reference 1
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-02
(0281)
Frequency Reference 2 Reference 2
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-03
(0282)
Frequency Reference 3 Reference 3
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-04
(0283)
Frequency Reference 4 Reference 4
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-05
(0284)
Frequency Reference 5 Reference 5
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-06
(0285)
Frequency Reference 6 Reference 6
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-07
(0286)
Frequency Reference 7 Reference 7
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
d1-08
(0287)
Frequency Reference 8 Reference 8
All Modes
Sets the frequency reference for the drive. Setting units are
determined by parameter o1-03.
Note: The value set to o1-03 is changed to 1 and the
unit is changed to percentage automatically
when A1-02 is set to 6 or 7.
Default: 0.00 Hz
Min.: 0.00
Max.: 400.00
<1>
<2>
236
B.6 d: Reference Settings
510
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual