YASKAWA U1000 - Installing the Cooling Fan

3.
Release the cable from the hooks.
Note: Models 4o0302 to 4o0414 have 4 hooks.
A
A –Hook locations
Figure 7.24 Release the Cable
4.
Loosen the 2 screws affixing the cooling fan unit.
Figure 7.25 Remove the Cooling Fan Unit
5.
Unplug the relay connector and release the fan from the drive.
Figure 7.26 Unplug the Relay Connector
u
Installing the Cooling Fan
1.
Pass the cable through the opening of the replacement cooling fan unit from the back side, then plug the relay
connector.
7.4 Drive Cooling Fans
434
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual