YASKAWA U1000 - Page 221

No. Name Setting Range Default
b9-01 Zero Servo Gain 0 to 100 5
n
b9-02: Zero Servo Completion Width
Sets the output range of the Zero Servo completion signal. Enter the amount of deviation allowable from the desired position
to trigger Zero Servo. An output terminal set for Zero Servo (H2-oo = 33) will be triggered when the motor reaches the
position Zero Servo plus or minus b9-02.
No. Name Setting Range Default
b9-02 Zero Servo Completion Width 0 to 16383 10
5.2 b: Application
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
221
5
Parameter Details