A –9 screw locations
Figure 7.38 Loosen the Screws and Remove the Terminal Cover
3.
Loosen the 25 screws that hold the drive cover 2 in place and free it from the drive.
CAUTION! Crush Hazard. Do not completely remove the cover screws, just loosen them. If the cover screws are removed
completely, the terminal cover may fall off causing an injury. Take special care when removing/reattaching the terminal covers for
larger drives.
A –25 screw locations
Figure 7.39 Loosen the Screws and Remove Drive Cover 2
4.
Unplug the relay connectors and free the cable from the cooling fan unit.
7.4 Drive Cooling Fans
YASKAWA ELECTRIC SIEP C710636 04D U1000 Industrial MATRIX Drive Technical Manual
439
7
Periodic Inspection &
Maintenance
To Next Page
Loading...
