6-4
IM AQ6370D-01EN
Setting Up the Overview Window
When the waveform display is enlarged or reduced using the zoom function, the overview
window is displayed at the very bottom of the waveform display area. (Only displayed
when a zoom is performed.)
Showing/Hiding the Window and Setting the Display Position
1.
Press ZOOM.
2.
Press the OVERVIEW DISPLAY OFF/L/R soft key. Each time the soft key is
pressed, the setting changes in the order Hide, Display Left, and Display Right.
Setting the Window Size
1.
Press ZOOM.
2.
Press the OVERVIEW SIZE LARGE/SMALL soft key. The window switches
between large and small.
Waveform display example
OVERVIEW DISPLAY OFF/L/R set to L and OVERVIEW SIZE LARGE/SMALL set to
SMALL.
6.1 Zooming In/Out on Waveforms
To Next Page
Loading...
Need help?
General
