7-63
IM AQ6370D-01EN
Analysis
7
When the Logging Item Is PEAK
• Setting the Minimum Peak/Bottom Difference of the Mode Judgment Reference
3.
Press the ANALYSIS PARAMETER soft key. The menu for detecting peak values
is displayed.
4.
Press the MODE DIFF soft key. The screen for setting the mode judgment
reference is displayed.
5.
Enter the mode judgment reference using the rotary knob, arrow keys, or numeric
keypad.
6.
Press nm/ENTER.
Note
• For a description of the mode judgment reference, see “MODE DIFF” in section 6.13.
• If you change a setting, the value specified in section 6.13 will also change (because the
parameter is shared).
7.15 Analysis Data Logging
To Next Page
Loading...
Need help?
General
