8-4
IM AQ6370D-01EN
Displaying and Changing the Memory List
1.
Press MEMORY. The soft key menu for the internal memory appears.
2.
Press the MEMORY LIST soft key. The internal memory list and trace list are
displayed.
3.
Press the LIST PARAMETER soft key, then select either LBL (label) or CONDTN
(data measurement condition).
The displayed items of the memory list change to labels or measurement conditions.
You can also change the display contents of the memory list by using the SAVE, RECALL,
and CLEAR menus.
CONDIN (Measurement conditions)
8.2 Temporarily Saving and Redisplaying Traces to and from Internal Memory
To Next Page
Loading...
