Name: Zebra DS457
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

7 - 6 DS457 Fixed Mount Imager Integration Guide

Decoding Illumination

Parameter # 298 (SSI # F0h 2Ah)

Selecting Enable Decoding Illumination causes the imager to turn on illumination every image capture to aid

decoding. Select Disable Decoding Illumination to prevent the imager from using decoding illumination.

Enabling illumination usually results in superior images. The effectiveness of illumination decreases as the

distance to the target increases.

Decode Aiming Pattern

Parameter # 306 (SSI # F0h 32h)

This parameter only applies in Decode Mode. Select Enable Decode Aiming Pattern to project the aiming

pattern during bar code capture, or Disable Decode Aiming Pattern to turn the aiming pattern off.

NOTE Changing this parameter while using Presentation Mode, with or without Motion Enhancement, is not

recommended.

*Enable Decoding Illumination

(1)

Disable Decoding Illumination

(0)

NOTE If Picklist Mode on page 6-19 is enabled, the decode aiming pattern turns on even when disabled.

*Enable Decode Aiming Pattern

(2)

Disable Decode Aiming Pattern

(0)

Questions and Answers:

Need help?

Do you have a question about the Zebra DS457 and is the answer not in the manual?

Zebra DS457 Specifications

General