Name: Zebra DS457
Brand: Zebra
Rating: 4 (1 reviews)

To Next Page

To Previous Page

User Preferences 6 - 23

PDF Prioritization

Parameter # 719 (SSI # F1h CFh)

Enable this feature to delay decoding a 1D bar code (Code 128 of 8 to 25 characters length) by the value

specified in PDF Prioritization Timeout. During that time the imager attempts to decode a PDF417 symbol

(e.g., on a US driver's license), and if successful reports this only. If it does not decode (can not find) a PDF417

symbol, it reports the 1D symbol after the timeout. The 1D symbol must be in the device’s field of view for the

imager to report it. This parameter does not affect decoding other symbologies.

PDF Prioritization Timeout

Parameter # 720 (SSI # F1h D0h)

When PDF Prioritization is enabled, this timeout specifies how long the imager attempts to decode a PDF417

symbol before reporting the 1D bar code in the field of view.

Scan the following bar code, then scan four digits from Appendix D, Numeric Bar Codes that specify the

timeout in milliseconds. For example, to enter 200 ms, scan the following bar code, then scan 0200. The range

is 0 to 5000 ms, and the default is 400 ms.

*Disable PDF Prioritization

(0)

Enable PDF Prioritization

(1)

PDF Prioritization Timeout

NOTE PDF Prioritization Timeout must be at least one second lower than the Decode Session Timeout.

Questions and Answers:

Need help?

Do you have a question about the Zebra DS457 and is the answer not in the manual?

Zebra DS457 Specifications

General