Zebra DS457 - Unique Bar Code Reporting; Mirrored Image

User Preferences 6 - 21
Unique Bar Code Reporting
Parameter # 723 (SSI # F1h D3h)
Enable this to report only unique bar codes while the trigger is pressed. This option only applies when
Continuous Bar Code Read is enabled.
Mirrored Image
Parameter # 624 (SSI # F1h 70h)
Enable this to scan images in reverse, or mirrored, as if seen through a mirror. This mode is useful in
applications requiring scanning through a mirror and using symbologies that do not decode in reverse.
Enabling this mode when using snapshot, video, or video viewfinder modes transmits images as mirrored
images.
Disable Unique Bar Code Reporting
(0)
*Enable Unique Bar Code Reporting
(1)
*Disable Mirrored Image
(0)
Enable Mirrored Image
(1)