Zebra DS457 User Manual

9 - 2 DS457 Fixed Mount Imager Integration Guide
Serial Parameter Defaults
Table 9-1 lists the defaults for serial host parameters. To change any option, scan the appropriate bar code(s)
provided in the Serial Host Parameters section beginning on page 9-3.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 9-1 Serial Host Default Table
Parameter Default
Page
Number
Serial Host Parameters
Serial Host Types Standard RS-232 9-5
Baud Rate 9600 9-7
Parity Type None 9-9
Data Bits 8-Bit 9-9
Check Receive Errors Enable 9-10
Hardware Handshaking None 9-11
Software Handshaking None 9-13
Host Serial Response Time-out 2 Sec 9-15
RTS Line State Low RTS 9-16
Beep on <BEL> Disable 9-16
Intercharacter Delay 0 msec 9-17
Nixdorf Beep/LED Options Normal Operation 9-18
Ignore Unknown Characters Send Bar Code 9-18

Zebra DS457 Specifications

General

Type	Fixed bar code reader
Wavelength	655 nm
Sensor type	-
Scanner type	1D/2D
Optical sensor resolution	752 pixels
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	450 mA
Safety	ETL, VDE, CETL, EN60950, Ctick, VCCI
Certification	FCC, RoHS
Product color	Black
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Cables included	USB, VGA
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	58.4 mm
Width	62 mm
Height	29.2 mm
Weight	111 g