Zebra DS457 User Manual

User Preferences 6 - 17
Power Mode (RS-232 Hosts Only)
Parameter # 128 (SSI # 80h)
Select whether or not the imager enters Low Power consumption mode after a decode attempt. In Continuous
On mode, the imager does not enter this low power state.
Time Delay to Low Power Mode
Parameter # 146 (SSI # 92h)
This parameter sets the time the imager remains active after decoding. After a scan session, the imager waits
this amount of time before entering Low Power mode.
Continuous On
(0)
*Low Power Mode
(1)
NOTE This parameter only applies when Power Mode is set to Low Power.
To program a different value for this parameter than those provided here, see Using Time Delay to Low
Power Mode with SSI on page 8-7.
*1 Second
(17)
5 Seconds
(21)

Zebra DS457 Specifications

General

Type	Fixed bar code reader
Wavelength	655 nm
Sensor type	-
Scanner type	1D/2D
Optical sensor resolution	752 pixels
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	450 mA
Safety	ETL, VDE, CETL, EN60950, Ctick, VCCI
Certification	FCC, RoHS
Product color	Black
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Cables included	USB, VGA
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	58.4 mm
Width	62 mm
Height	29.2 mm
Weight	111 g