Zebra DS457 User Manual

Serial Interface 9 - 5
Serial Host Types
To select a serial host interface, scan one of the following bar codes.
NOTE Scanning Standard RS-232 activates the serial driver, but does not change port settings (e.g., parity, data
bits, handshaking). Selecting another serial host type bar code changes these settings.
NOTE Selecting one of the Serial Host Types disables SSI support. To restore SSI support, scan SSI Host on
page 8-9.
NOTE The CUTE host disables all parameter scanning, including Set Defaults. If you inadvertently select CUTE,
scan *Enable Parameter Scanning (1) on page 6-6, then change the host selection.
*Standard RS-232
ICL Serial
Wincor-Nixdorf Serial Mode A
Wincor-Nixdorf Serial Mode B

Zebra DS457 Specifications

General

Type	Fixed bar code reader
Wavelength	655 nm
Sensor type	-
Scanner type	1D/2D
Optical sensor resolution	752 pixels
Standard interfaces	USB
Connectivity technology	Wired
Input voltage	5 V
Power consumption	450 mA
Safety	ETL, VDE, CETL, EN60950, Ctick, VCCI
Certification	FCC, RoHS
Product color	Black
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-20 - 50 °C
Cables included	USB, VGA
Harmonized System (HS) code	84716070

Weight and Dimensions

Depth	58.4 mm
Width	62 mm
Height	29.2 mm
Weight	111 g