Symbologies 12 - 77
GS1 DataBar Limited Security Level
Parameter # 728
(SSI #
F1h D8h)
The imager offers four levels of decode security for GS1 DataBar Limited bar codes. There is an inverse
relationship between security and decoder aggressiveness. Increasing the level of security can reduce
aggressiveness in scanning, so only choose the level of security necessary.
•
Level 1 – No clear margin required. This complies with the original GS1 standard, yet might result in
erroneous decoding of the DataBar Limited bar code when scanning some UPC symbols that start with
the digits “9” and “7”
.
•
Level 2 – Automatic risk detection. This level of security may result in erroneous decoding of DataBar
Limited bar codes when scanning some UPC symbols. If a misdecode is detected, the decoder operates
in Level 3 or Level 1.
•
Level 3 – Security level reflects newly proposed GS1 standard that requires a 5X trailing clear margin.
•
Level 4 – Security level extends beyond the standard required by GS1. This level of security requires a
5X leading and trailing clear margin.
Security Level 1
(1)
Security Level 2
(2)
*Security Level 3
(3)
Security Level 4
(4)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
