Zebra MC33 Series User Manual

Data Capture
117
Figure 99 Pick List Mode with Multiple Barcodes in Aiming Pattern: Standard and Extended Range
5. Release the scan button or Trigger.
6. The barcode content data appears in the text field.
Barcode Capture with Laser Scanner
To capture barcode data:
1. Ensure that an application is open on the device and a text field is in focus (text cursor in text field).
2. Point the top of the device at a barcode.
3. On the MC33XX–R, rotate the Turret for optimal scanning position.
4. Point the scan exit window at a barcode.
Figure 100 Barcode Scanning – MC33XX-G
5. Press and hold the Scan button.
The red scan line turns on to assist in aiming. Ensure that the scan line crosses every bar and space of the
barcode.
The Scan LEDs light green and a beep sounds, by default, to indicate the barcode was decoded successfully.
Figure 101 Linear Scanner Aiming Pattern
6. Release the scan button.
7. The captured data appears in the text field.

Zebra MC33 Series Specifications

General

Brand	Zebra
Model	MC33 Series
Category	Handhelds
Language	English