Zebra MC33 Series User Manual

Using the MC33
70
6. Copy or delete photos as required.
Disconnect from the Host Computer
1. On the host computer, unmount the device.
2. Remove the USB cable from the device or remove the device from the cradle.
CAUTION Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.

Zebra MC33 Series Specifications

General

Connectivity	USB 2.0, Bluetooth
Touch Panel	Capacitive, glove and wet touch support
Keypad Options	Touchscreen or physical keypad
Scanning	1D/2D barcode scanning
Wireless LAN	IEEE 802.11 a/b/g/n/ac
Operating Temperature	-20° C to 50° C