Zebra MC33 Series - Un-powered Forklift Mount

Accessories
185
Un-powered Forklift Mount
The Un-powered Forklift Mount allows the user to place the MC33XX in a holder while installed on a forklift.
However, it does not provide charging or communication to the terminal. The Forklift Mount can be installed on a
square surface or roll bar of a forklift and supports portrait (vertical) orientation.
Figure 51 Forklift Mount
To use the MC33XX in the forklift mount holder:
1. Insert the MC33XX into the Forklift Mount Holder in an upright position.
Figure 52 Insert MC33XX
2. Secure the device with the rubber strap and snap into place.