Zebra MC93 Series Product Reference Guide

Accessories
130
NOTE: To charge the device in a cradle, completely remove the rubber boot.
Installing the Hand Strap
To install the hand strap:
1. Thread and pull-through the short section through the opening near the base of the trigger handle.
2. Thread and pull-through the longer section through the opening near the battery.
3. Attach the two plastic ends together.
1 Tabs

Zebra MC93 Series Specifications

General

Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Storage	32 GB Flash
Battery	7000 mAh
Connectivity	USB 2.0
Camera	13 MP rear camera
Drop Specification	Multiple 8 ft. / 2.4 m drops to concrete per MIL-STD 810G across operating temperature range
Sealing	IP65
Touch Panel	Capacitive Corning Gorilla Glass
Keypad Options	Numeric, Function Numeric, Alpha-Numeric
Scanning	1D/2D
Wireless LAN	802.11 a/b/g/n/ac
Audio	Speaker, microphone
Display	4.3 in. WVGA (800 x 480), color TFT-LCD with backlight