Application Deployment
145
4.
Remove the microSD card from the host computer.
5. Press and hold the Power button on the device until the menu appears.
6. Touch Power off.
7. Remove the battery from the device.
8. Remove the keypad.
9. Slide the microSD card holder to the Open position.
10. Lift the microSD card holder.
11. Insert the microSD card into the card holder door ensuring that the card slides into the holding tabs on
each side of the door.
12. Close the microSD card holder door and slide the door to the Lock position.
13. Replace the keypad.
14. Insert the battery.
15. Press and hold the Power button to turn on the device.
16. Swipe the screen up and select to view files on the microSD card.
17. Touch > SD card.
18. Locate the application .apk file.
19. Touch the application file.
20. Touch Continue. to install the app or Cancel to stop the installation.
21. To confirm installation and accept what the application affects, touch Install otherwise touch Cancel.
22. Touch Open to open the application or Done to exit the installation process. The application appears in
the App list.
Uninstalling an Application
1. Go to Settings.
2. Touch Apps & notifications.
3. Touch See all apps to view all apps in the list.
4. Scroll through the list to the app.
5. Touch the app. The App info screen appears.
6. Touch Uninstall.
7. Touch OK to confirm.
Performing a System Update
System Update packages can contain either partial or complete updates for the operating system. Zebra
distributes the System Update packages on the Zebra Support & Downloads web site. Perform a system
update using either a microSD card or using ADB.
Downloading the System Update Package
1. Go to the Zebra Support & Downloads web site, www.zebra.com/support.
To Next Page
Loading...
Need help?
General
