Zebra MC93 Series Product Reference Guide

Getting Started
19
Setting Up the Device
To start using the device for the first time:
1. Install a microSD card (optional)
2. Install the battery
3. Charge the device
4. Power on the device.
Installing a microSD Card
The microSD card slot provides secondary non-volatile storage. The slot is located under the keypad
module. For more information, refer to the documentation provided with the card, and follow the
manufacturer’s recommendations for use. It is strongly recommended that prior to use, you must format
the microSD card on the device.
NOTE: The following microSD cards were tested and are validated for use with the MC93XX:
• SanDisk 16GB (SDSDQ-016G-A11M)
• SanDisk 32GB (SDSDQ-032G-A11M)
• SanDisk 64GB (SDSDQUA-064G-U46A)
• SanDisk 128GB (SDSDQUI-128G-A46)
• SanDisk 200GB (SDSDQUAN-200G-A4A)
CAUTION: Follow proper electrostatic discharge (ESD) precautions to avoid damaging the microSD card.
Proper ESD precautions include, but are not limited to, working on an ESD mat and ensuring that the
operator is properly grounded.
1. Power off the device.
2. Remove the battery.
18 Camera flash Provides illumination for the camera.
Camera is available only on some configurations.
19 NFC antenna Provides communication with other NFC-enabled devices.
NFC antenna is available only on the premium configurations.
20 Rear camera Takes photos and videos.
The rear camera is available only on the premium configurations.
Number Item Function

Zebra MC93 Series Specifications

General

Operating Temperature	-4°F to 122°F/-20°C to 50°C
Processor	Qualcomm Snapdragon 660 octa-core, 2.2 GHz
Operating System	Android 11
RAM	4 GB
Storage	32 GB Flash
Battery	7000 mAh
Connectivity	USB 2.0
Camera	13 MP rear camera
Drop Specification	Multiple 8 ft. / 2.4 m drops to concrete per MIL-STD 810G across operating temperature range
Sealing	IP65
Touch Panel	Capacitive Corning Gorilla Glass
Keypad Options	Numeric, Function Numeric, Alpha-Numeric
Scanning	1D/2D
Wireless LAN	802.11 a/b/g/n/ac
Audio	Speaker, microphone
Display	4.3 in. WVGA (800 x 480), color TFT-LCD with backlight