Maintenance and Troubleshooting
196
4-Slot Spare Battery Charger Troubleshooting
16-Slot Spare Battery Charger Troubleshooting
Table 25 Troubleshooting the 4-Slot Battery Charger
Problem Cause Solution
Spare Battery
Charging LED does
not light when spare
battery is inserted.
Spare battery is
not correctly
seated.
Remove and re-insert the spare battery into the charging
slot, ensuring it is correctly seated.
Spare Battery not
charging.
Charger is not
receiving
power.
Ensure the power cable is connected securely to both the
charger and to AC power.
Spare battery is
not correctly
seated.
Remove and re-insert the battery into the battery adapter,
ensuring it is correctly seated.
Battery adapter
is not seated
properly.
Remove and re-insert the battery adapter into the charger,
ensuring it is correctly seated.
Battery was
removed from
the charger or
charger was
unplugged from
AC power too
soon.
Ensure charger is receiving power. Ensure the spare battery
is seated correctly. The battery charges from fully depleted
to 90% in approximately 2.5 hours, and from fully depleted
to 100% in approximately three hours.
Battery is faulty. Verify that other batteries charge properly. If so, replace the
faulty battery.
Table 26 Troubleshooting the 16-Slot Battery Charger
Problem Cause Solution
Spare Battery
Charging LED does
not light when spare
battery is inserted.
Spare battery is
not correctly
seated.
Remove and re-insert the spare battery into the charging
slot, ensuring it is correctly seated.
To Next Page
Loading...
Need help?
General
