Zebra MC93 Series Product Reference Guide

Getting Started
27
Replacing the Battery
1. Push in the two primary Battery Release buttons.
The battery ejects slightly. With Hot Swap mode, when you remove the battery, the display turns off and
the device enters a low power state. The device retains RAM data for approximately five minutes.
Replace the battery within five minutes to preserve memory persistence.
2. Push in the secondary battery release buttons on the sides of the battery.
3. Remove the battery from the battery slot.
4. Align the battery with the battery slot.
5. Push the battery into the battery slot.

Zebra MC93 Series Specifications

General

Brand	Zebra
Model	MC93 Series
Category	PDA
Language	English