Zebra MC93 Series Product Reference Guide

Accessories
98
Cables
USB Charge/Com Snap-On Cup
A separate USB cable and power
supply is required to support fast
charging. USB (Type-C) Cable is
required to allow communication from
the snap-on to the PC/laptop.
CBL-MC93-USBCHG-01 Provides power and/or communication over USB
to the device. Requires wall adapter/power supply
PWR-WUA5V12W0xx.
1-Slot Cradle USB Cable CBL-TC2X-USBC-01 Provides USB communication through the 1-Slot
USB cradle to the host computer.
Miscellaneous
Cradle Adapter ADP-MC93-CRDCUP-01 MC93XX Charge Only Adapter for backwards
compatibility with MC9XX cradles. Works with
MC9XX 1-Slot USB Cradle, and 4-Slot Charge
Only Cradle.
7000mAh PowerPrecision+ standard
battery
BTRY-MC93-STN-01
BTRY-MC93-STN-10
BTRY-MC93-STN-IN
Replacement standard battery.
Replacement standard battery (10–pack).
Replacement standard battery (India).
5000mAh PowerPrecision+ freezer
battery
BTRY-MC93-FRZ-01
BTRY-MC93-FRZ-10
Replacement freezer battery.
Replacement freezer battery (10–pack).
7000mAh PowerPrecision+
non-incendive battery
BTRY-MC93-NI-01
BTRY-MC93-NI-10
Replacement non-incendive battery.
Replacement non-incendive battery (10–pack).
MC93XX Hand Strap SG-MC93-HDSTPG-01 Replacement hand strap for the MC93XX Hand
strap loop holds an optional stylus
(SG-TC7X-STYLUS-03).
MC93 Soft Holster for Gun SG-MC9X-SHLSTG-01 Provides a soft, clip on holster and a shoulder
strap for the MC93XX.
MC93 Rubber Boot for Gun SG-MC93-RBTG-01 Provides additional protection for wear and tear of
the MC93XX.
Screen Protector MISC-MC93-SCRN-01 Provides additional protection for display (5-pack).
Stylus and Tether SG-TC7X-STYLUS-03 Conductive carbon-filled stylus for capacitive
touch panel; includes coiled tether (3-pack).
Un-powered Forklift Mount MNT-MC93-FLCH-01 Un-powered forklift mount. Allows installing the
device on a roll bar or square surface of a forklift.
Includes:
Forklift holder (MNT-MC93-FLCH-01), RAM
double socket arm for 1” ball (MNT-RAM-B201U),
and RAM forklift clamp 2.5” max width square rail
base with 1” ball (MNT-RAM-B247U25).
Table 8 MC93XX Accessories (Continued)
Accessory Part Number Description

Zebra MC93 Series Specifications

General

Brand	Zebra
Model	MC93 Series
Category	PDA
Language	English