Accessories 6 - 5
Figure 6-2 Insert TC8000 into Cradle
2. Ensure the device is seated properly. The Charging/Scan LED blinks indicating charging.
Charging the Spare Battery
1. Insert a spare battery into the spare battery slot.
2. Ensure the battery is seated properly. The Spare Battery Charging LED blinks indicating charging.
Battery Charging
Main Battery Charging
The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page
1-9. The 6,700 mAh battery fully charges in less than four hours at room temperature.
Spare Battery Charging
The Spare Battery Charging LED indicates the status of the spare battery charging. The 6,700 mAh battery fully
charges in less than four hours at room temperature.
Table 6-2 Spare Battery Charging LED Indicators
State Indication
Off The battery is not charging. The battery is not inserted correctly in the cradle or
connected to a power source. Cradle is not powered.
Solid Amber Healthy battery is charging.
Solid Green Healthy battery charging is complete.
Fast Blinking Red
(2 blinks/second)
Charging error, e.g.:
- Temperature is too low or too high.
- Charging has gone on too long without completion (typically eight hours).
Solid Red Unhealthy battery is charging or fully charged.
To Next Page
Loading...
Need help?
General
