EasyManuals Logo

Zebra TC8000 User Manual

Zebra TC8000
162 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #24 background imageLoading...
Page #24 background image
1 - 8 TC8000 User Guide
Figure 1-8 Battery Installation
3. Press the battery into the handle until it snaps into place.
Charging the Battery
Before using the TC8000 for the first time, charge the battery using a cable or a cradle with the appropriate power
supply. For information about the accessories available for the TC8000, see Chapter 6, Accessories.
4-Slot Battery Charger
2-Slot USB Charge Cradle
5-Slot Charge Only Cradle
5-Slot Ethernet Cradle
5-Slot Charge Only Cradle with 4-Slot Battery Charger
5-Slot Ethernet Cradle with 4-Slot Battery Charger.
The 6,700 mAh battery fully charges in approximately four hours at room temperature.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). The TC8000 or accessory always performs
battery charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 °C (+98 °F)) the
TC8000 or accessory may for small periods of time alternately enable and disable battery charging to keep the
battery at acceptable temperatures. The TC8000 or accessory indicates when charging is disabled due to
abnormal temperatures via its red blinking LED.
1. To charge the main battery, connect the charging accessory to the appropriate power source.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zebra TC8000 and is the answer not in the manual?

Zebra TC8000 Specifications

General IconGeneral
Resolution480 x 800 pixels
Storage8 GB Flash
IP SealingIP65
Operating SystemAndroid
Processor1.7 GHz Dual-core
RAM1 GB
Battery Capacity6700 mAh
ConnectivityWi-Fi, Bluetooth
Touch PanelCapacitive
Scanning1D/2D Barcode
Operating Temp-20°C to 50°C
Drop Spec8 ft./2.4 m drop to concrete
Display Size4.0 inches

Related product manuals