Wireless 4 - 15
2. Touch Bluetooth.
3. If Bluetooth is not on, slide the switch to the ON position.
4. In the PAIRED DEVICES list, touch and hold on a unconnected Bluetooth device until a menu appears.
5. Touch Connect. When connected, the device is displayed as connected in the list.
Selecting Profiles on the Bluetooth Device
Some Bluetooth devices have multiple profiles. To select a profile:
1. Touch .
2. Touch Bluetooth.
3. In the PAIRED DEVICES list, touch next to the device name.
4. Under PROFILES, check or uncheck a profile to allow the device to use that profile.
5. Touch .
Unpairing a Bluetooth Device
To unpair a Bluetooth device and erase all pairing information:
1. Touch .
2. Touch Bluetooth.
3. In the PAIRED DEVICES list, touch next to the device name.
4. Touch Unpair.
5. Touch .
Near Field Communications
NFC/HF RFID is a short-range wireless connectivity technology standard that enables secure transaction between
a reader and a contactless smart card. The technology is based on ISO/IEC 14443 type A and B (proximity), Felica
and ISO/IEC 15693 (vicinity) standards, using the HF 13.56 MHz unlicensed band. The TC8000 supports three
operating modes:
•
Reader mode
•
Peer-to-Peer communication
•
Card Emulation mode.
Using NFC, the TC8000 can:
•
Read contactless cards such as contactless tickets, NFC labels, HF tokens or standard smart cards.
•
Read and write information to contactless cards such as SmartPosters and tickets, as well as devices with
NFC interface such as vending machines.
To Next Page
Loading...
Need help?
General
