Zebra TC8000 - WPS Pin Entry

Wireless 4 - 9
Figure 4-8 Wi-Fi Direct Screen
2. Under Peer Devices, touch the other device name.
3. On the other device, select Accept.
4. Connected appears on the TC8000. On both devices, in their respective Wi-Fi Direct screens, the other device
name appears in the list.
Figure 4-9 Wi-Fi Direct Connected
WPS Pin Entry
Wi-Fi Protected Setup (WPS) is a feature allowing devices to easily connect to Wi-Fi access points without typing a
long password.
To use a PIN to connect to a wireless router:
1. Log in to the router.
2. Go to the Add WPS Client screen. Refer to the wireless router user documentation specific information.