Zebra TC8000 User Manual

Accessories 6 - 21
1. Press the release level toward the cable.
2. Rotate the adapter toward the front of the device and remove.
Battery Charging
To charge the TC8000, attached the power cable to the Power Connection on the USB and Charging Cable.
Main Battery Charging
The TC8000 Charging/Scan LED indicates the status of the battery charging in the device. See Table 1-3 on page
1-9. The 6,700 mAh battery fully charges in less than four hours at room temperature.
Charging Temperature
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). The battery charger always performs battery
charging in a safe and intelligent manner. At higher temperatures (e.g. approximately +37 °C (+98 °F)) the battery
charger may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The battery charger indicates when charging is disabled due to abnormal temperatures
via its LED.

Zebra TC8000 Specifications

General

Resolution	480 x 800 pixels
Storage	8 GB Flash
IP Sealing	IP65
Operating System	Android
Processor	1.7 GHz Dual-core
RAM	1 GB
Battery Capacity	6700 mAh
Connectivity	Wi-Fi, Bluetooth
Touch Panel	Capacitive
Scanning	1D/2D Barcode
Operating Temp	-20°C to 50°C
Drop Spec	8 ft./2.4 m drop to concrete
Display Size	4.0 inches