CHAPTER 7 MAINTENANCE AND
TROUBLESHOOTING
Introduction
This chapter includes instructions on cleaning and storing the TC8000, battery maintenance and provides
troubleshooting solutions for potential problems during TC8000 operations.
Maintaining the TC8000
For trouble-free service, observe the following tips when using the TC8000:
•
Protect the TC8000 from temperature extremes.
•
Do not store or use the TC8000 in any location that is extremely dusty, damp, or wet.
•
Use a soft lens cloth to clean the scan exit window of the TC8000. If the surface of the TC8000 screen
becomes soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution. Do not use
bleach or ammonia.
•
Take care not to scratch the screen of the TC8000.
•
The display of the TC8000 contains glass. Take care not to drop the TC8000 or subject it to strong impact.
Battery Safety Guidelines
•
The area in which the TC8000 units are charged should be clear of debris and combustible materials or
chemicals. Particular care should be taken where the device is charged in a non-commercial environment.
•
Do not use incompatible batteries and chargers. If you have any questions about the compatibility of a
battery or a charger, contact Zebra Support. See Service Information on page xiv for contact information.
•
Do not crush, puncture, or place a high degree of pressure on the battery.
•
Follow battery usage, storage, and charging guidelines.
•
Improper battery use may result in a fire, explosion, or other hazard.
•
To charge the mobile device battery, the battery and charger temperatures must be between +32°F and
+104°F (0°C and +40°C)
To Next Page
Loading...
Need help?
General
