Wireless 4 - 3
Configuring a Wi-Fi Network
To set up a Wi-Fi network:
1. Touch > > Wi-Fi.
2. Slide the switch to the ON position.
3. The device searches for WLANs in the area and lists them on the screen.
4. Scroll through the list and select the desired WLAN network.
5. Touch the desired network. If the network security is Open, the device automatically connects to the network.
For all other network security a dialog box appears.
Figure 4-3 WLAN Network Security Dialog Box
6. If the network security is WEP or WPA/WPS2 PSK, enter the required password and then touch Connect.
7. If the network security is 802.1x EAP:
•
Touch the EAP method drop-down list and select PEAP, TLS, TTLS, LEAP or FAST.
To Next Page
Loading...