Applications 5 - 3
PTT Express Voice Client
•
Group Call: Press and hold the PTT (Talk) button to start communicating with other voice client users.
PTT Audible Indicators
The following tones provide helpful cues when using the voice client.
•
Talk Tone: Double chirp. Plays when the Talk button is depressed. This is a prompt for the user to start
talking.
•
Access Tone: Single beep. Plays when another user just finished a broadcast or response. The user is now
able to initiate a Group Broadcast or Private Response.
•
Busy Tone: Continuous tone. Plays when the Talk button is depressed and another user is already
communicating on the same talkgroup. Plays after the maximum allowed talk time is reached (60 seconds).
•
Network Tone:
• Three increasing pitch beeps. Plays when PTT Express has acquired the WLAN connection and the
service is enabled.
• Three decreasing pitch beeps. Plays when PTT Express has lost the WLAN connection or the service is
disabled.
Figure 5-2 PTT Express Default User Interface
NOTE
PTT Express Voice Client creates Push-To-Talk (PTT) communication capability between disparate
enterprise devices. Leveraging existing Wireless Local Area Network (WLAN) infrastructure, PTT Express
delivers simple PTT communication without the need of a voice communication server.
Settings
Enable/Disable Switch
Notification Icon
Service Indication
Talk Groups
To Next Page
Loading...