Zebra TC8000 User Manual

Getting Started 1 - 17
Setting the Screen Brightness
To set the screen brightness:
1. Touch > > Display.
2. Touch Brightness.
Figure 1-20 Brightness Dialog Box
3. Use the slider to set a brightness level or touch Auto to set the device to automatically adjust the brightness
using the built-in light sensor.
4. Touch .
Setting Screen Timeout Setting
To set the screen sleep time:
1. Touch > > Display > Sleep.
2. Select one of the sleep values.
• 15 seconds
• 30 seconds
• 1 minute
• 2 minutes
• 5 minutes (default)
• 10 minutes
• 30 minutes.
3. Touch .
Setting Font Size
To set the size of the font is system applications:
1. Touch > > Display > Font size.
2. Select one of the font size values.
• Small
• Normal (default)
• Large
• Huge.
3. Touch .

Zebra TC8000 Specifications

General

Resolution	480 x 800 pixels
Storage	8 GB Flash
IP Sealing	IP65
Operating System	Android
Processor	1.7 GHz Dual-core
RAM	1 GB
Battery Capacity	6700 mAh
Connectivity	Wi-Fi, Bluetooth
Touch Panel	Capacitive
Scanning	1D/2D Barcode
Operating Temp	-20°C to 50°C
Drop Spec	8 ft./2.4 m drop to concrete
Display Size	4.0 inches