Zebra TC8000 User Manual

Name: Zebra TC8000
Brand: Zebra
Rating: 5 (1 reviews)

162 pages

To Next Page

To Previous Page

7 - 4 TC8000 User Guide

6. Ensure that there is no lint left by the cotton tipped applicator, remove lint if found.

7. If grease and other dirt can be found on other areas of the cradle, use lint free cloth and alcohol to remove.

8. Allow at least 10 to 30 minutes (depending on ambient temperature and humidity) for the alcohol to air dry

before applying power to cradle.

If the temperature is low and humidity is high, longer drying time is required. Warm temperature and dry

humidity requires less drying time.

Cleaning Frequency

The cleaning frequency is up to the customer’s discretion due to the varied environments in which the TC8000

units are used. They may be cleaned as frequently as required. However when used in dirty environments it may

be advisable to periodically clean the scanner exit window to ensure optimum scanning performance.

Questions and Answers:

Need help?

Do you have a question about the Zebra TC8000 and is the answer not in the manual?

General