Zebra TC8000 - Page 73

Wireless 4 - 7
• Never On - The radio turns off when the device enters suspend mode (default).
• Scanning always available - Select to let Google’s location service and other applications scan for
networks, even when Wi-Fi is off. Default - disabled.
• Install Certificates – Touch to install certificates.
• Wi-Fi optimization - Select to minimize battery usage when Wi-Fi is on.
• Avoid poor connections - Select to not use Wi-Fi networks that have poor internet connections.
• MAC address - Displays the Media Access Control (MAC) address of the device when connecting to
Wi-Fi networks.
• Regulatory
• Country selection - Displays the acquired country code if Auto is selected else displays the selected
country code. Default: Auto.
• Region code - Displays the configured region code for the device.
• Band and Channel Selection
• Wi-Fi frequency band - Use to select the frequency band. Options: Auto (default), 5 GHz only or 2.4
GHz only.
• Available channels (2.4 GHz) - Use to select specific channels. Touch to display the Available channels
menu. Select specific channels. Touch OK.
• Available channels (5 GHz) - Use to select specific channels. Touch to display the Available channels
menu. Select specific channels. Touch OK.
• Logging
• Advanced Logging – Touch to enable advanced logging.
• Wireless logs - Use to capture Wi-Fi log files.
• Fusion Logger - Touch to open the Fusion Logger application. This application maintains a history of
high level WLAN events which helps to understand the status of connectivity.
Figure 4-6 Fusion Logger Screen
• Fusion Status - Touch to display live status of WLAN state. Also provides information of device and
connected profile.