Product Manual - ZMORPH FAB back to table of content
>>
12
Warranty and liability
3. Manufacturer’s warranty
and liability
3.1 Scope of the warranty
with any parts, it can be easily removed and shipped to manufacturer for maintenance.
3.1.1 Guarantor is only liable for the physical defects resulting from the inherent causes in the sold product.
3.1.2 Duration of the warranty starts at the date of purchase of the product by the initial Buyer. The Date of
by the time which was required to repair the product (which includes the time from the delivery of the
defective product with the complete warranty claim until the date of returning the repaired product to the
Customer).
3.1.3
any defects resulting from:
a) improper use or application of the product;
b) improper product selection for the existing installation site conditions;
c) improper or inconsistent with User Guide installation (including improper connection to the main
power supply), maintenance, storage or transport;
d) mechanical, chemical or thermal damages;
e) deliberate product damages;
f) damages ensuing as a result of non-original or inconsistent with Zmorph’s recommendations or
with the User Guide product use;
g) random events;
h) factors being result of major force, random events or any other external factors;
i) use of non-original parts or consumables;
Zmorph representative or other representative authorized by Zmorph to carry out any of the above
mentioned actions;
k) continued usage of the product despite occurrences indicating an obvious defect;
l) improper transport methods provided by the Customer;
To Next Page
Loading...
Need help?
General
