Product Manual - ZMORPH FAB back to table of content
>>
155
15.6 Thick Paste Extruder Toolhead safety rules
Thick Paste Extruder Toolhead enables 2D and 3D printing of dense masses which are extruded at high
pressure through an exchangeable nozzle. During the work remember to always follow safety restrictions:
Do not inject any hard and solid materials inside of the Thick Paste Extruder Toolhead syringe. It may
damage the Thick Paste Extruder Toolhead.
Do not place your hands in the working area during Thick Paste Extruder Toolhead work.
Install the workpieces and tools in the correct places in a safe manner. Avoid colliding with the
workpiece with the machine and the Thick Paste. Otherwise, it may be damaged.
Check that there are no obstacles in the work area before starting work.
Thick paste extruding workow
To Next Page
Loading...
