Product Manual - ZMORPH FAB back to table of content
>>
24
8.3 Functionalities
Magnetic detachable covers - fully transparent covers allow for a clear, not obstructed view of
Fabrication processes. For easy cleaning and maintenance of the machine, covers can be removed
thanks to the magnetic mounting system. Covers removal is described in of this manual
space on your desk. Spool holder mounting is described in 9.3 part of this manual.
Closed-Loop System - controls the current position of the toolhead in X and Y axes. Whenever detects
to ensure the best quality of Fabrication. It is also used as a protection system in case of severe
positioning problems (like blocked tool-head).
Properly mounted toolhead will ensure high-quality Fabrication whether it is additive or subtractive
manufacturing. Toolhead change is described in of this manual.
has developed special software and mechanical solution to make the leveling process easy and
reliable. There are both automatic and manual calibration methods available. Calibration methods are
described in , , , , parts of this manual. Please remember that automatic calibration
is available only for 3D printing toolheads.
Filament change - an additional feature that can be performed during printing with both single and
Dual Extruder Toolhead Toolhead. Allows for easy change of material to achieve either multi-colored or
even multi-material models.
toolhead position is saved and later restored upon booting machine again.
machine operation.
material shortage is detected the machine stops and pause the printing process and turns on the
Smart toolheads system - whenevere the machine detects a change in the toolhead cable connection
it will automaticly assist the user in the changing process and detects the correct toolhead.
Machine specication
To Next Page
Loading...
