Zmorph FAB - 4 Certificates

Product Manual - ZMORPH FAB back to table of content >>
15
Ceicates
4. Ceicates
Zmorph S.A.
A. Ostrowskiego 9, 53-238 Wrocław, Poland
NIP: 899-274-32-04 | KRS:0000724021
+48 71 33 68 923 | contact@zmorph3d.com
zmorph3d.com
UE/EC DECLARATION OF CONFORMITY
Manufacturer/address:
Zmorph S.A.
A. Ostrowskiego 9, 53-238 Wrocław Poland
Object of the declaration:
Personal fabricator
Type/model: ZMORPH FAB
Object of the declaration described above is in conformity with the directives:
EMC 2014/30/UE; RoHS 2011/65/WE; LVD 2014/35/UE; MAD 2006/42/WE
The object also is in conformity with the relevant community harmonisation legislation:
PN-EN 55011:2016-05; PN-EN 61000-3-3:2013:10; PN-EN 61000-4-2:2011; PN-EN
61000-4-3:2007+A1:2008+A2:2011; PN-EN 61000-4-4:2013:05; PN-EN 61000-4-5:2014-10;
PN-EN 61000-4-6:2014-04; PN-EN 61000-4-11:2007; PN-EN 61000-4-11:2007;
PN-EN 61000-3-2:2014-10; PN-EN 55011-1:2012 group 1; PN-EN 55011-:2012 class B;
PN-EN 61000-3-3:2013; PN-EN 61000-3-2:2014-10; PN-EN 61000-4-4:2013;
PN-EN 61000-4-3:2007; PN-EN 61000-4-6:2009; PN-EN 61000-4-5:2014; PN-EN 61000-4-11:2007.
The declaration was issued as a result of the conformity assessment procedure
conducted with the directives.
Conrmed by the sign:
Independent laboratory tests were conducted.
Any change made to this device will void this declaration.
It is forbidden to use the device against its intended use.
This declaration of conformity is issued under the sole responsibility of the Manufacturer.
The technical documentation is kept at the Manufacturer address.
Wrocław 29.10.2020
_____________________________
Maciej Nawrocki