Zmorph FAB - 15 Thick Paste Extruding; Thick Paste Extruder Toolhead

Product Manual - ZMORPH FAB back to table of content >>
148
Thick paste extruding workow
15. Thick Paste Extruding
15.1 Thick Paste Extruder Toolhead
Thick Paste Extruder Toolhead is a toolhead usable in 2D and 3D printing. It consists of a stepper motor
that pushes material in syringe through nozzle.
Main elements of Thick Paste Extruder Toolhead:
Specication:
 Construction: 3 mm aluminum base with
ABS printed parts
 
 
 
the material)
 Extrusion: Direct Drive
 
(without covers)
 Recommended printing resolution: 2 mm

 

 
 
mm
Nozzle
Piston
SyringeAluminium mounting base Toolhead cables
Stepper motor