Zmorph FAB - 8.3 First Print

Product Manual - ZMORPH FAB back to table of content >>
19
Single Extruder
Toolhead 1.75
CNC Worktable
Protective
goggles
Plywood
Cleaning
needle
Cooling
fan
PrintaStick
adhesive
Milling
Toolhead
Laser
Toolhead
CNC cutter
2x CNC clamp
Spatula
8 mm
spanner
13 mm
spanner
Zmorph Fab
0,5 kg PLA
0,4 mm
nozzle
SD card
Power cord
Spool holderHeated worktable
4 x allen key
Adjustable
wrench
Sets
7. Sets
7.1 Types of sets and their content
What’s in the box:
Additional accesories:

HEPA 
nd with already installed right cover or it is possible to
order it separately.
Zmorph Fab Custom
Zmorph Fab 3D printer
Zmorph Fab All-in-One
Hepa filter system Right cover Screwdriver