Product Manual - ZMORPH FAB back to table of content
>>
18
Unauthorised uses
It is forbidden to install the device outside areas which are dry and free from humidity or dust.
It is forbidden to cover the device with any material during operation.
It is forbidden to leave the device running unattended when working with the Laser Toolhead.
It is forbidden to interfere with the constructional solutions of the product.
It is forbidden to connect the machine to a faulty power supply system.
It is forbidden to connect the device to the a power outlet without grounding.
It is forbidden to insert hands or any body parts between moving parts.
It is forbidden to touch heated elements during operation.
It is forbidden to use the device without the required protective equipment.
It is forbidden for untrained personnel to operate the device.
It is forbidden to use a damaged device.
How to use Zmorph Fab
To Next Page
Loading...
