Product Manual - ZMORPH FAB back to table of content
>>
160
16.5 X,Y,Z axes procedures
To Do Tools Frequency Solution
Checking the
friction on the
X and Y axis
carriages
working
hours
Manually move the toolhead left/right and the
worktable move forwards/backwards to determine
if something is hindering their movement.
Cleaning the X and
Z axis rails from
dirt and lubricating
them
lubricating oil
PTFE grease
dry cloth
paper towel
working
hours
Apply some grease to a dry cloth or paper towel
and spread it on the X and Z-axis rods. For easier
access to the Z-axis guides, the side covers can be
removed. Check the rods for dirt, remove it with
a dry cloth or mechanically. Manually move the
toolhead left/right to spread the grease.
Cleaning the Y axis
rails from dirt and
lubricating them
lubricating oil
PTFE grease
dry cloth
paper towel
working
hours
Apply some grease to a dry cloth or paper towel
and spread it on Y-axis rails. Manually move the
worktable forwards/backwards to spread the grease.
Checking the
tension of the
timing belts of the
X and Y axis
adjustable
Allen key
working
hours
In the case of loose timing belts, tighten the
tension bar screws. For the X-axis belts, evenly
tighten the two screws located on the right-hand
the front of the machine. Then, using a tension
Y-axis straps and tighten the tension bar screws.
Checking the
mounting screws in
the timingpulley for
the X and Y axis
Allen key 2mm Tighten all mounting screws in the timing
pulley on the X and Y axes.
Lubrication the
Z axis
Lubrication the
Z axis
working
hours
Apply the grease directly to the Z-axis screws
just above the Z-axis lifts, and then use the LCD
interface to move the Z-axis up and down to
distribute the grease through the screws.
Maintenance and operation
Lack of proper axis maintenance may have an impact on the printed model, the model quality might
drop or the axis may get stuck (axis blockage). Regular cleaning and proper lubrication of the axis can
Failure to clean the machine may result in unwanted damage or malfunction of the drive components.
To Next Page
Loading...
