Zmorph FAB - 18 Firmware Upgrades; General Informations

Product Manual - ZMORPH FAB back to table of content >>
162
ADRES IP
SERIAL NUMBER / FIRMWARE
BACK
Firmware upgrades
18. Firmware upgrades
18.1 General informations
-
able to download at the Zmorph Knowledge Base: bit.ly/Zmorph_Fab_Firmware

Version is displayed in lower box after the slash symbol (/) and contains three digits separated by dots. For

             
newsletter so be sure to follow these.
Firmware update is available in several language versions (German, English, French, Kazakh, Polish, Spanish).

File naming convention is as follows: FAB_Firmware_FIRMWARE_VERSION_NUMBER_ LANGUAGE.zip e.g.

            
named FIRMWARE.bin.
NEW JOB MAINTENANCE
LOAD
FILAMENT
CHANGE
TOOL
CALIBRATE
3D PRINTING
BACK MORE
INFOMOVE
AXIS
CHANGE
TOOL
BACK
30.207.101.107
1025/Fab xxx