Zmorph FAB Manual Guide

Product Manual - ZMORPH FAB back to table of content >>
151
Click NEXT when
ready. You will be
automatically moved to
the SETTINGS tab.
Now you can check the
generated G-code and
save it.
Set operation parameters according to paste being
used and click NEXT and wait for your G-code to
be generated.
Thick paste extruding workow

Zmorph FAB Specifications

General

Build Volume	250 x 235 x 165 mm
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Print Speed	up to 100 mm/s
Software	Voxelizer
Dimensions	530 x 555 x 480 mm
Layer Resolution	0.05 - 0.3 mm
Connectivity	USB, Ethernet
Supported Materials	PLA, ABS, PETG, TPU, Nylon
Power Supply	24V DC
Print Technology	Fused Filament Fabrication (FFF)
Extruder Type	Single Extruder
Display	5-inch capacitive touchscreen