42 CHAPTER 2: LOGGING IN THROUGH THE CONSOLE PORT
Configure the
authentication
mode
Enter the default ISP
domain view
domain Domain name Optional
By default, the local AAA
scheme is applied. If you
specify to apply the local
AAA scheme, you need
to perform the
configuration
concerning local user as
well.
If you specify to apply an
existing scheme by
providing the
radius-scheme-name
argument, you need to
perform the following
configuration as well:
■ Perform AAA-RADIUS
configuration on the
switch. (Refer to
“AAA/RADIUS/HWTA
CACS Configuration”
on page 747 for
more.)
■ Configure the user
name and password
accordingly on the
AAA server. (Refer to
“Configuring AAA”
on page 758.)
Specify the AAA
scheme to be applied to
the domain
authentication default
{ hwtacacs- scheme
hwtacacs-scheme-name
[ local ] | local | none |
radius-scheme
radius-scheme-name
[ local ]}
Quit to system view quit
Create a local user (Enter local user view.) local-user user-name Required
No local user exists by
default.
Set the authentication password for the
local user
password { simple |
cipher } password
Required
Specify the service type for AUX users service-type terminal
[ level level ]
Required
Quit to system view quit -
Enter AUX user interface view user-interface aux 0 -
Configure to authenticate users locally or
remotely
authentication-mode
scheme [ command-
authorization ]
Required
The specified AAA
scheme determines
whether to authenticate
users locally or remotely.
Users are authenticated
locally by default.
To do… Use the command… Remarks
To Next Page
Loading...
