Console Port Login Configuration with Authentication Mode Being Scheme 43
Configure the console port speed speed-value Optional
The default baud rate of
the AUX port (also the
console port) is 9,600
bps.
parity { even | mark |
none | odd | space }
Optional
By default, the check
mode of the console
port is set to none, that
is, no check bit.
stopbits { 1 | 1.5 | 2 } Optional
The default stop bits of
the console port is 1.
databits { 5 | 6 | 7 | 8 } Optional
The default data bits of
the console port is 8.
Configure the command level available
to users logging in to the user interface
user privilege level
level
Optional
By default, commands of
level 3 are available to
users logging in to the
AUX user interface.
Define a shortcut key for starting
terminal sessions
activation-key
character
Optional
By default, pressing
Enter key starts the
terminal session.
Define a shortcut key for aborting tasks escape-key { default |
character }
Optional
The default shortcut key
combination for aborting
tasks is < Ctrl+C >.
Make terminal services available to the
user interface
shell Optional
By default, terminal
services are available in
all user interfaces.
Set the maximum number of lines the
screen can contain
screen-length
screen-length
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Set history command buffer size history-command
max-size value
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10
commands by default.
To do… Use the command… Remarks
To Next Page
Loading...
